PTFE Guides

Engineering guides on PTFE materials, product selection, dimensions, applications and custom manufacturing.

Explore PTFE products · Send specifications for a quote

PTFE vs FEP Heat-Shrink Tubing for Heat-Sensitive Assemblies

FEP heat-shrink tubing can be worth evaluating when a PTFE sleeve’s documented recovery requirement is difficult for an assembly to accommodate. A lower published recovery temperature does not prove that the covered component will remain cool enough, and it does not establish the finished sleeve’s suitability in service. Compare identified products against two separate questions: […]

PTFE vs FEP Heat-Shrink Tubing for Heat-Sensitive Assemblies Read More »

PTFE Rod Purchasing: Full Bars, Cut Blanks or Finished Parts?

Compare full PTFE bars, cut blanks and finished parts against the same drawing, material grade, accepted quantity and delivery date. The lowest stock price is not necessarily the lowest cost to obtain usable parts. Buying blanks transfers cutting work; buying finished parts transfers more manufacturing work, but neither removes the need to define acceptance and

PTFE Rod Purchasing: Full Bars, Cut Blanks or Finished Parts? Read More »

PTFE Capillary Sample-Loop Volume: Calculate Bore Volume Before Specifying a Loop

For a circular, uniform tube bore, geometric volume is V = π × ID² × L / 4. Use internal diameter, not outside diameter. The result describes the tube cavity only: valve passages, fittings and the selected flow path must be considered separately before defining an installed sample loop. Calculate tube-only volume or length ·

PTFE Capillary Sample-Loop Volume: Calculate Bore Volume Before Specifying a Loop Read More »

PTFE Tubing Gas Permeation: Reviewing Analyzer Sample Lines

PTFE tubing can be a candidate for an analyzer sample line, but chemical compatibility and a passing flow test do not establish that the sample composition will remain representative. Define the analyte, surrounding atmosphere and allowed measurement bias before selecting the tube. If wall permeation could exceed that allowance and the complete assembly cannot demonstrate

PTFE Tubing Gas Permeation: Reviewing Analyzer Sample Lines Read More »

Need a PTFE product matched to your application?

Send the product type, dimensions, quantity, operating conditions and drawing when available. Pengrowth will review the requirements for a custom quotation.